 |
 |
 |
 |
G01 - Cedar BracketFlowerWindowBoxes.com is a custom millworks and windowbox company that
custom fabricates, designs, and manufactures an exclusive line of
architectural wood brackets. Our cedar wood brackets are designed for
structural applications. They can be custom made for architects,
builders, and remodelers, and we can match any DWG file or drawing.
All of our cedar brackets, cedar corbels, cedar gable brackets, cedar braces, and cedar rafter tails are made from solid wood Red Western Cedar and available in both Rough or Smooth form.
“Due to the fact that Red western cedar comes in many color variations from reddish white to reddish browns your brackets and corbels may have beautiful color variations that differ from one product to the next. By looking at all of our products online you will get a good idea of some of
those different color variations.”
Custom Sizes available upon request - click here, email us your specs or drawings at sales@flowerwindowboxes.com, or call us Toll Free at 888-505-7715. Specifications: 20" Projection x 20"High x 4" Thick (Rough, 3.5" Thick Smooth)
We recommend to always paint, stain, or seal your product prior to installing it outside. Very large timbers if left outside exposed to rain and temperature fluctuations without being sealed, stained, or painted can dry out at uneven rates causing large timbers to develop small cracks in them. These small cracks are called checks and are almost always cosmetic only. Although some people like the look of the small checks, other customers may not.
- Specifications:
20" Projection x 20"High x 3.5" Thick (smooth, 4"Thick rough) (Solid, Paintable, Stainable)
CEDAR BRACKETS Our cedar brackets are for decorative purposes. If planning to use structurally you MUST consult a professional contractor, engineer, or architect first to ensure you are ordering adequately sized brackets for your application. Also, we recommend using the professionals install method instead of our own since it will need to be specifically catered to your application. We do not load test our products but can provide cut sheets and specs on how these are constructed to your professionals so they can better understand the product and determine how to use them. If being used decoratively, however, then simply mount at the corresponding points in the diagram into load bearing studs hidden behind the wall. If masonry application, then you will need to install concrete anchors in he wall to receive the lag screws. Predrill a 3/16” hole in each spot of the bracket, then screw ¼” Timberlok lag screws through the bracket and the wall. You can sink the head of the screws 1” into the face of the bracket then fill the hole with wood putty or conceal with a wooden plug (not included) to hide the screw head. NOTE: If used outdoors we recommend sealing the wood to minimize the chance of it cracking over time. Sealing with oil-based paints (not latex), stain, or clear sealant is preferred. Large timbers can be subjected to small cracks over time nonetheless up to 1/16” wide without compromising the product.
|
|
 |
 |
 |
 |

|